Printer Diy Kit

#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer

#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer
#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer
#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer

#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer   #001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer

This listing is for a. Brand New & Sealed Genuine Fully Assembled Original Prusa i3 MKS3S+ 3D Printer Kit in Colour as Orange. ### It is not a cheap clone ###. You don't need to wait 8-10 weeks to get it from Prusa.

FULL FEATURES LIST (DECEMBER 2020 EDITION). Removable magnetic spring steel sheet with PEI surface.

Brand new EINSY RAMBo motherboard. Silent Trinamic drivers with 256 microstepping. Maximum travel speed up to 200 mm/s. Sensorless homing for X and Y axes.

Detection and recovery of shifted layers. Power loss detection and recovery. Better cooling from both sides of the object. Optional WIFI with Octoprint interface.

Bondtech extruder drive - filament is driven from both sides. Both extruder cooling fan and print cooling fan detect RPM. When extruder fan is blocked, the printer will stop to prevent damage of extruder. The same applies for the print cooling fan.

New temperature-independent SuperPINDA with no temperature drift more info. Reliable hight quality MISUMI Bearings.

Great build volume 11,025 cm. (25 x 21 x 21 cm or 9,84 x 8,3 x 8,3 in) (X×Y×Z). Integrated LCD and SD card controller (8GB included). 0.4mm nozzle (easily changeable) for 1.75 mm filament.

Layer height from 0.05 mm. Heatbed with cold corners compensation for. 3D printing from any material. Hassle free PEI print surface - no glass, no glue, no ABS juice. Supported materials PLA, ABS, PET, HIPS, Flex PP, Ninjaflex, Laywood, Laybrick, Nylon, Bamboofill, Bronzefill, ASA, T.

Printing based on layer height. 1 kg (2 lbs) silver PLA filament included. Kit box dimensions: 11 kg, 42×43×24 cm; 16.5×16.9×9.5 in (D×H×W). Assembled printer box dimensions: 11 kg, 52×48×54 cm; 20.5×18.9×21 in (D×H×W).

Printer dimensions (without spool): 7 kg, 55×40×50 cm; 21.6x15.7x19.6 in (D×H×W). Power consumption: PLA settings: 80W / ABS settings: 120W. WITH THE ORIGINAL PRUSA i3 MK3S+ WE ARE INTRODUCING. SuperPINDA is temperature-independent , it features a much higher quality sensor and better quality components overall comparing with the P.

V2, plus, it does not need a thermistor. A combination of all these enhancements ensures the first layer will always be spot on!

We now have a new set of metal clips for the MISUMI bearings on Y-axes. They are easier to mount and provide better support for the bearings. X-axes belt tensioning mechanism was reworked and X-end plastic parts reinforced. Extruder changes provide better printability for flexible filaments.

MK3S+ includes all the cumulative upgrades from the entire life cycle of the MK3 like genuine Gates belts , textile sleeves, a new Einsy case for easier Raspberry Pi connection, an anti-rust coating on smooth PEI sheets and, of course, dozens of firmware and plastic parts enhancements. Read more about features of Original Prusa i3 MK3S+ below! Where MK3/S+ also received "Editor's Choice" as the highest-rated 3D printer in 2019 Digital Fabrication Guide. The MK3S+ features a rebuilt extruder, numerous sensors, and various smart features. Plus, a new magnetic MK52 heatbed with a replaceable PEI spring steel print sheet. Dozens of various tweaks and upgrades improve the reliability and ease of use. MK3Ss functionality can be further expanded with the unique Multi-Material Upgrade 2S addon.

For printing with up to 5 materials simultaneously. Below, you can see some of the many 3D printer awards Prusa Research received. The most significant features of Original Prusa i3 MK3S+.

The new MK52 Magnetic Heatbed holds a replaceable alloy spring steel sheet with a PEI surface. You can choose between two types of sheets - smooth PEI sheet (default option) and textured powder coated PEI. With the MK3S+ we are introducing the reworked Y axis from. It provides the same rigidity as some other printers while providing the sleek look of our milled Dural frame.

The frame is also optimized to add 10 mm of Z height totaling at 210 mm. The previous sensor didnt work well with some specific filaments.

The new sensor is using the optical sensor which is triggered by a simple mechanical lever. This sensor doesnt care about the optical properties of the filament and cannot die because of mechanical wear. Thanks to the new Trinamic2130 drivers and Noctua fan, the MK3S+ is extremely quiet in the stealth mode. But the MK3S+ is quieter than 99 % of the available printers, even in the Normal mode. In normal mode, we have also increased the travel speed.

Now you can achieve up to 200 mm/s! Have you ever tripped over the extension cord and lost a 20-hours print? The printer can fully recover from the loss of power. It detects power interruption and shuts down the heatbed and extruder heating. After restoring the power, you can continue with printing.

Thanks to completely reworked extruder changing the nozzle or PTFE tube is easier than ever before. As a bonus, the nozzle and the extruder motor is much closer to the X axis, this means less resonance and better prints too. MK3S is also better for printing from flexible materials. The new EINSY RAMBo motherboard with Trinamic drivers not only makes the MK3S+ silent but it also can detect skipped steps and layer shifting.

This is a big step forward in the reliability of the printer and the user comfort. You can say goodbye to ugly prints! The extruder has now upgraded with Bondtech drive gear. It grips the filament from both sides, increasing the push force and making the printer more reliable.

Also, the print fan now cools part from two sides, increasing the overall performance. E3D V6 is market-leading all metal hotend well known for its high-temperature performance.

The reliability has proved in our. Upgrade and continues to deliver great performance in surprisingly small form factor. Read more about features of our brand new Original Prusa i3 MK3S+ in the article at. The item "#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer" is in sale since Friday, February 5, 2021. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "josephjerin" and is located in Slough. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Bahamas, Colombia, Jamaica, Kuwait, Panama, Qatar, Uruguay, Viet nam.
  • Brand: Prusa
  • Custom Bundle: No
  • Model: Prusa i3
  • Maximum Print Size: 250 x 210 x 210 mm
  • Unit Quantity: 1
  • Country/Region of Manufacture: Czech Republic
  • Nozzle Size: 0.4mm
  • 3D Technology: FDM
  • Printing Speed: Maximum 200 mm/s
  • MPN: I3 MK3S+
  • Unit Type: Unit
  • Features: Adjustable Layer Thickness

#001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer   #001 UK STOCK Fully Assembled Original Prusa i3 MKS3S+ 3D Printer