FDM 3D Printer Kit 300x300x400mm Desktop Resume Printing Replace CR-10S Pro, US. Voltage: Input 110-240V, Output 24V15A. Power Supply: Mean-Well Power 350W. Print Size: 300300400mm(11.811.815.7inch). Printing speed: less than 180mm/s, narmal 30-60mm/s.
Layer thickness: 0.1-0.4mm. Nozzle diameter: standard 0.4mm. Hotbed temperature: less than 110 degree centigrade.Nozzle temp: 260 degree centigrade. Working mode: online or SD slot offline printing. Slicing software: Cura/repetier-host /simplify 3d. Language:English, Italian, Spanish, Russian, French, Chinese. TCM2208 industrial Grade Noiseless chipset.
Allows more accurate, fast, safe and quiet print. Allows Print big models efficiently at once thanks to a big printing area of 300300400mm.
Three contact sensor terminal stops are set on the XYZ axis respectively, in order to synchronize the dual Z system. Double motor + double screw + double Z-axis limit switch to ensure the stability and flatness of the printing platform.It detects the filament end and sent reminder to avoid air-printing. Good memory and resume printing.
Resume after power outage and we continue to print. With integrated operating system and user-friendly touch screen, you can directly pause or restore printing, change the filament or adjust the print speed and temperature. Good heat dissipation, fast heating, smooth discharge and no plugging, up to 260°. Fast heating up thanks to its efficient power supply, only.5 minutes to heat up. It can improve the forming effect. Built-in thermal runaway protection function. When it exceeds the warning temperature, then it will automatically cool the machine. For BL-Touch leveling sensor, Far-end extrusion structure and near-end feeding into one machine, in order to print soft materials. 1 x FDM 3D Printer. Q1:Since this is obviousely a Creality CR 10 V2 clone, what parts are different? A: You may like Pyramid A1 better as it is fully Upgraded, more metal then plastic and the touch screen. Q2:Does it come with any needed software? A:Yes, it comes with the cura software in the U disk, and you also can download the latest version or other free software, like fusion 360, it is free for hobbyists. Q3:Is this an open source printer? Can i use the creality slicer with it?
A:Yes, it is an open source printer. Most slicer can work with it, you also can use creality slicer. Q4:Does it detect when it's out of filament? It will automatically suspend when it's out off filament. Q5:If power is lost in the middle of a print job, is the printer able to resume printing where it left off, or will the print job have to be restarted?
A:Yes, it support to resume printing where it left off. Q6:How do I update the firmware on the Printer? A:Please kindly send us message and we will send the firmware to you. Q8 How to Leveling the hotbed?
A : Please check the following video. Feedback is very important to us. It is impossible to address issues if we do not know about them!Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle motor with. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Rail, 3D printer parts, etc. If you need any Industrial parts or repairs, welcome to contact me, we will try our best to help you.
Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it's non-workdays, please kindly be patient and wait till Monday.
The item "FDM 3D Printer Kit 300x300x400mm Desktop Resume Printing Replace CR-10S Pro, US" is in sale since Friday, October 9, 2020. This item is in the category "Computers/Tablets & Networking\3D Printers & Supplies\3D Printers". The seller is "vipwindows-2020" and is located in Shenzhen. This item can be shipped to United States, Germany, Canada, United Kingdom.