Printer Diy Kit

HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY

HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY
HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY

HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY    HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY

HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY. HDMI Board Work for Mipi LCD Screen Input Power Adapter: 5Vdc More than 1A. Come In Standby Model When Not Input Signal Standby Model. 8.90 inch 2560X1600 2K IPS LCD Screen : Display New Mode2, Normally Black, Transmissive Resolution 2560(RGB)×1600 Outline Size 132×198.8×1.45(H×V×D) Display Area 123.2× 195.96 (H×V) Brightness 500 cd/m2 Typ.

Contrast Ratio 1300:1 Typ. (CR10) [Left / Right / Up / Down] Signal Interface MIPI (2 ch, 4 data lanes) , 61pins, Connector Backlight WLED Input Voltage 1.8/5.75/-5.75V Typ.

When HDMI signal is not accept. It shows black Image and LED flashing on main board. Please change HDMI source for test.

It shows correct image and LED is blue. This Board work with PC and Raspberry Pi. The image not support Scaling.

It shows image depend on HDMI input source. Turn On aConnect Converter Board With LCD Screen Interface bConnect Main Board With 61Pin Cable cInsert HDMI Type Cable dTurn On 5Vdc or USB as Power Supply. Turn Off aTurn Off 5Vdc or Remove USB Power Adapter bRemove HDMI Cable cDisconnect Main Board With 61Pin Cable dDisconnect 61Pin Cable With LCD Screen For PC and 3D printer: 1.

Most of MIPI screen for vertical display. Need to adjust computer graphics mode. Replication Mode - Extended mode - Vertical and Horizontal adjustment. The Main Board Four Locating Holes Compatible With Raspberry Pi.

Different Raspberry Pi are set differently. Packing list : 1× HDMI To Mipi LCD Controller Board VS-HDMITMIPI-V1 1× 8.90 inch. 2560X1600 2K LCD Screen 1× Signal Power Cable. The earlier you pay, the sooner you receive your item.

If you can't pay it within 15 days, we view you give up. Some times the date will be delayed due to a shortage.

United States / Unied Kingdom / Australia. Canada / Russia / new Zealand/middle east. Spain / Germany / European Union Nations and countries. The item "HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY" is in sale since Thursday, April 25, 2019.

This item is in the category "Computer, Tablets & Netzwerk\Firmennetzwerke & Server\Server-Komponenten\Server-Boards". The seller is "xiongchun2013" and is located in Shenzhen Guangdong.

This item can be shipped worldwide.

  • Ausländisches Produkt: Nein
  • Marke: Markenlos
  • Herstellernummer: nicht zutreffend
  • Angebotspaket: Nein
  • Herstellergarantie: 1 Jahr
  • Modifizierter Artikel: Nein
  • Herstellungsland und -region: China


HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY    HDMI To MIPI Controller board kit + 8.9 25601600 LCD LED HD For 3D printer DIY